IEI Technology AFL3-W15B-H81, User Manual

Page: 37 / 138

AFL3-W15B-H81 Panel PC
Page 23
Step 3:
Line up the notch on the mSATA module with the notch on the connector. Slide
the mSATA module into the socket at an angle of about 20º (
Figure 3-7
).
Step 4:
Press the other end of the mSATA module down and secure the module with the
previously removed retention screw (
Figure 3-7
).
Figure 3-7: mSATA Module Installation
Step 5:
Replace the back cover.
Step 0:
3.7 COM1 DB-9 Serial Port Pin 9 Selection
The JP5 jumper configures pin 9 on the COM1 serial port. Pin 9 on the COM1 DB-9
connector can be set as the ring (RI) signal, +5 V or +12 V. The jumper selection options
are shown in
Table 3-1
.
NOTE:
The user can select only one of the settings in
Table 3-1
at a time.
JP5 Description
Short 1-2 COM1 RI Pin use +12 V
Short 3-4 COM1 RI Pin use RI (Default)
Short 5-6 COM1 RI Pin use +5 V
Table 3-1: COM1 DB-9 Serial Port Pin 9 Setting Jumper Settings