IEI Technology AFL3-12A/W15A-BT, User Manual

Page: 41 / 130

AFL3-12A/W15A-BT Panel PC
Page 27
3.9 Clear CMOS
If the AFL3-12A/W15A-BT fails to boot due to improper BIOS settings, the clear CMOS
jumper clears the CMOS data and resets the system BIOS information. To do this, push
the clear CMOS button for three seconds, then restart the system. The clear CMOS button
location is shown in
Figure 3-12
.
Figure 3-12: Clear CMOS Button Location
3.10 AT/ATX Mode Selection
AT or ATX power mode can be used on the AFL3-12A/W15A-BT. The selection is made
through an AT/ATX switch located on the bottom panel (
Figure 3-13
).
Figure 3-13: AT/ATX Switch Location
3.10.1 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL3-12A/W15A-BT panel PC turns on automatically when the power
is connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including: