IEI Technology AFL3-12A/W15A-BT, User Manual

Page: 37 / 130

AFL3-12A/W15A-BT Panel PC
Page 23
Figure 3-7: HDD Bracket Retention Screws
Step 3:
Attach the HDD brackets to the HDD. To do this, align the four retention screw
holes in the both sides of the HDD bracket with the retention screw holes on the
sides of the HDD. Insert four retention screws into the HDD bracket
(
Figure 3-8
).
Figure 3-8: HDD Retention Screws
Step 4:
Connect the SATA cable and SATA power cable to the rear of HDD from the
motherboard.
Step 5:
Install the HDD into the AFL3-12A/W15A-BT by aligning the retention screw
holes in the HDD brackets with the retention screw holes on the chassis. Insert
the four retention screws.