IEI Technology AFL3-12A-AL, User Manual

Page: 61 / 145

AFL3-W10A/12A/W15A-AL Panel PC
Page 47
Step 7:
Once the panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet ( Figure 3-32 ).
3.13.4 Arm Mounting
The AFL3-W10A/12A/W15A-AL is VESA (Video Electronics Standards Association)
compliant and can be mounted on an arm with a 75 mm or a 100 mm interface pad. To
mount the AFL3-W10A/12A/W15A-AL on an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and that
the arm has a 75 mm or a 100 mm interface pad. If the mounting arm is not
VESA compliant it cannot be used to support the
AFL3-W10A/12A/W15A-AL panel PC.
Step 2: Once the mounting arm has been firmly attached to the surface, lift the panel PC
onto the interface pad of the mounting arm.
Step 3:
Align the retention screw holes on the mounting arm interface with those in the
panel PC ( Figure 3-33 and Figure 3-34 ).