IEI Technology AFL2-17A-H61 Series, User Manual

Page: 80 / 278

AFL2-17A/AB-H61
P a g e 60
S te p 2:
Hold down the Function and Brightness Up buttons for three seconds to power
on the system. S te p 0:
5.12 P o we rin g Off th e S ys te m
To power off the system, follow the steps below:
S te p 1:
Locate the Function and Brightness Up function keys. See Section 1.2.1.1 .
S te p 2: Hold down the Function and Brightness Up buttons for six seconds to power off
the system.
S te p 0:
5.13 Mo u n tin g th e S ys te m
WARNING!
When mounting the flat bezel panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
The four methods of mounting the AFL2-17A/AB-H61 are listed below.

Wall mounting

Panel mounting

Stand mounting

Arm mounting
The four mounting methods are described below.
5.13.1 Wa ll Mo u n tin g
To mount the flat bezel panel PC onto the wall, please follow the steps below.
S te p 1:
Select the location on the wall for the wall-mounting bracket.
S te p 2: Carefully mark the locations of the four screw holes in the bracket on the wall.