IEI Technology AFL2-12A-HM65 Series User Manual Download Page 71

Page: 71 / 186

AFL2-12A-HM65 Series Panel PC

Page 71

Step 11:

Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated

with a strip of black electrical tape. See

Figure

5-7

NOTE:

To ensure the WLAN module functions correctly, please make sure the

WLAN antennas are attached in the proper configuration.

Figure

5-7: Attaching the Antennas

Step 12:

Replace the internal aluminum cover and secure it to the chassis using six (6)

retention screws.

Step 13:

Replace the back cover and secure it using nine (9) previously removed

retention screws.

Step 0:

Summary of Contents for AFL2-12A-HM65 Series



























































































































































































Search results

Summary of Contents for AFL2-12A-HM65 Series

Reviews:

Related manuals for AFL2-12A-HM65 Series

Brands by name

Popular brands

IEI Technology AFL2-12A-HM65 Series, User Manual

Search results

Summary of Contents for AFL2-12A-HM65 Series

Reviews:

Related manuals for AFL2-12A-HM65 Series

Brands by name

Popular brands