IEI Technology AFL2-08A-N26 Series, User Manual

Page: 79 / 195

AFL2-08A-N26
P a g e 63
Figure 6-4: DDR SO-DIMM Module Installation
S te p 11: Replace the internal aluminum cover and secure it to the chassis using five (5)
retention screws.
S te p 12:
Replace the back cover and secure it using ten (10) previously removed
retention screws. S te p 0:
6.5.2 WLAN Ca rd Re p la c e m e n t
The AFL2-08A-N26 has one WLAN card slot. To replace the WLAN card, follow the
instructions below.
S te p 1: Follow all anti-static procedures. See Section 6.2 .
S te p 2:
Turn off the power. See Section 6.3 .
S te p 3: Remove the back cover. See Section 6.4.1 above.
S te p 4:
Remove the internal back cover. See Section 6.4.2 above.
S te p 5: Locate the WLAN card.
S te p 6:
Disconnect the main and auxiliary antennas on the WLAN module and push the
two spring clips in to release the WLAN card ( Figure 6-5 ).