manualshive.com logo in svg

IEI Technology AFL-xxx-CX2, User Manual

Share
Download
IEI Technology AFL-xxx-CX2 User Manual Download Page 105

 

 

AFL-xxx-CX2 Panel PC 

Page 87

5.3.2 IDE Configuration 

Use the 

IDE Configuration

 menu (

BIOS Menu 4

) to change and/or set the configuration 

of the IDE devices installed in the system. 

BIOS Menu 4: IDE Configuration

 

 

IDE Master and IDE Slave 

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the 

status of the auto detected IDE devices. The following IDE devices are detected and are 

shown in the 

IDE Configuration

 menu: 

 

Primary IDE Master 

 

Primary IDE Slave 

 

Secondary IDE Master 

 

Secondary IDE Slave 

The 

IDE Configuration

 menu (

BIOS Menu 4

) allows changes to the configurations for the 

IDE devices installed in the system. If an IDE device is detected, and one of the above 

Summary of Contents for AFL-xxx-CX2










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands