manualshive.com logo in svg

IEI Technology AFL-xxx-CX2, User Manual

Share
Download
IEI Technology AFL-xxx-CX2 User Manual Download Page 76

 

 

AFL-xxx-CX2 Panel PC

Page 58 

Step 1: 

The arm is a separately purchased item. Please correctly mount the arm onto 

the surface it uses as a base. To do this, refer to the installation documentation 

that came with the mounting arm. 

 NOTE: 

When purchasing the arm please ensure that it is VESA compliant and 

that the arm has the correct interface pad. If the mounting arm is not 

VESA compliant it cannot be used to support the AFL-xxx-CX2. 

Step 2: 

Once the mounting arm has been firmly attached to the surface, lift the flat panel 

PC onto the interface pad of the mounting arm. 

Step 3: 

Align the retention screw holes on the mounting arm interface with those in the 

flat panel PC. The AFL-xxx-CX2 arm mount retention screw holes are shown in 

Figure 3-13

 and 

Figure 3-14

. 

 

Figure 3-13: Arm Mounting Screw Holes (AFL-07A-CX2 and AFL-08AH-CX2) 

 

Summary of Contents for AFL-xxx-CX2










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands