manualshive.com logo in svg

IEI Technology AFL-xxx-9103, User Manual, Page: 102 / 203

Share
Download
IEI Technology AFL-xxx-9103 User Manual Download Page 102

 

 

AFL-xxx-9103 Panel PC

Page 84 

The 

IDE Configuration

 menu (

BIOS Menu 4

) allows changes to the configurations for the 

IDE devices installed in the system. If an IDE device is detected, and one of the above 

listed four BIOS configuration options are selected, the IDE configuration options shown in 

Section 5.3.2.1

 appear. 

5.3.2.1 IDE Master, IDE Slave 

Use the 

IDE Master

 and 

IDE Slave

 configuration menu (BIOS Menu 5) to view both 

primary and secondary IDE device details and configure the IDE devices connected to the 

system.  

BIOS Menu 5: IDE Master and IDE Slave Configuration

 

 

Auto-Detected Drive Parameters 

The “grayed-out” items in the left frame are IDE disk drive parameters automatically 

detected from the firmware of the selected IDE disk drive. The drive parameters are listed 

as follows: 

 

Device

: Lists the device type (e.g. hard disk, CD-ROM etc.) 

Summary of Contents for AFL-xxx-9103












































































































































































































Reviews:

No comments