IEI Technology AFL-HM55 User Manual Download

Page: 13 / 140

AFL-HM55 Series Panel PC

Page 2

1.1 AFL-HM55 Series Flat Panel PC Overview

Figure 1-1: AFL-HM55 Series Flat Panel PC

The AFL-HM55 Series is an Intel® Core™ powered flat panel PC with a rich variety of

functions and peripherals. All AFL-HM55 Series models are designed for easy and

simplified integration into kiosk and point-of-sales (POS) applications.

An Intel® Core™ i7/i5/i3 processor coupled with the Intel® HM55 chipset delivers optimal

memory, graphics, and peripheral I/O support. The system comes with 2.0 GB of

preinstalled DDR3 dual-channel SO-DIMMs and supports a maximum of 8.0 GB ensuring

smooth data throughputs with reduced bottlenecks and fast system access. The

AFL-HM55 Series features a Gen 5.7 Enhanced Graphics Engine with 12 execution units

and DirectX 10 and Open GL 2.1 support for high quality video performance. Dual display

support is provided via VGA and HDMI ports.

Two serial ports and four external USB 2.0 ports provide simplified connectivity to a variety

of external peripheral devices. Wi-Fi capabilities and two RJ-45 GbE connectors allow for

smooth connection of the system to an external LAN. The AFL-HM55 Series also supports

a 2.5” SATA HDD drive which can be accessed without removing the entire back panel.

Summary of Contents for AFL-HM55













































































































































Search results

Summary of Contents for AFL-HM55

Reviews:

Related manuals for AFL-HM55

Brands by name

Popular brands

IEI Technology AFL-HM55, User Manual

Search results

Summary of Contents for AFL-HM55

Reviews:

Related manuals for AFL-HM55

Brands by name

Popular brands