IEI Technology AFL-HM55 User Manual Download Page 74

Page: 74 / 140

AFL-HM55 Series Panel PC

Page 63

The System Overview field also has two user configurable fields:

System Date [xx/xx/xx]

Use the

System Date

option to set the system date. Manually enter the day, month and

year.

System Time [xx:xx:xx]

Use the

System Time

option to set the system time. Manually enter the hours, minutes

and seconds.

5.3 Advanced

Use the

Advanced

menu (

BIOS Menu 2

) to configure the CPU and peripheral devices

through the following sub-menus:

WARNING:

Setting the wrong values in the sections below may cause the system

to malfunction. Make sure that the settings made are compatible with

the hardware.

ACPI

Settings

Trusted

Computing

CPU

Configuration

SATA

Configuration

USB

Configuration

Super IO Configuration

H/W

Monitor

Serial Port Console Redirection

Summary of Contents for AFL-HM55













































































































































Search results

Summary of Contents for AFL-HM55

Reviews:

Related manuals for AFL-HM55

Brands by name

Popular brands

IEI Technology AFL-HM55, User Manual

Search results

Summary of Contents for AFL-HM55

Reviews:

Related manuals for AFL-HM55

Brands by name

Popular brands