IEI Technology AFL-F08A-N270, User Manual

Page: 82 / 179

AFL-F08A-N270 Panel PC
Page 67
NOTE
: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Î
Base Address, IRQ [3F8h,4]
The
Base Address, IRQ
option cannot be configured and only shows the interrupt
address of the serial port listed above.
Î
Serial Port Mode [115200 8,n,1]
Use the
Serial Port Mode
option to select baud rate through which the console redirection
is made. The following configuration options are available
ƒ 115200 8,n,1
D
EFAULT
ƒ 57600 8,n,1
ƒ 38400 8,n,1
ƒ 19200 8,n,1
ƒ 09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
Î
Redirection After BIOS POST [Always]
Use the
Redirection After BIOS POST
option to specify when console redirection should
occur.
Î
Disabled
The console is not redirected after POST
Î
Boot Loader
Redirection is active during POST and during Boot
Loader
Î
Always D
EFAULT
Redirection is always active (Some OSes may not
work if set to Always)