IEI Technology AFL-9652 Series User Manual Download Page 99

Page: 99 / 199

Page 81

interface of a managed client system, such as BIOS

menu, is displayed through the management system.

6.3.6 Intel Robson Configuration

The

Intel Robson Configuration

menu (

BIOS Menu 10

) allows the Intel® Robson

Technology option to be configured.

BIOS Menu 10: Intel Robson Configuration

Intel Robson [Disabled]

Use the

Intel Robson

BIOS option to enable or disable the Intel® Robson Technology

feature. Intel® Robson, Intel® Turbo Memory, is a technology introduced by Intel® to

boost a computer startup process.

Disabled D

EFAULT

Disables the Intel® Robson feature

Enabled

Enables the Intel® Robson feature

Summary of Contents for AFL-9652 Series








































































































































































































Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands

IEI Technology AFL-9652 Series, User Manual

Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands