IEI Technology AFL-9652 Series User Manual Download Page 103

Page: 103 / 199

Page 85

6.3.8 USB Configuration

Use the

USB Configuration

menu (

BIOS Menu 12

) to read USB configuration

information and configure the USB settings.

BIOS Menu 12: USB Configuration

USB Configuration

The

USB Configuration

field shows the system USB configuration. The items listed are:

Module Version: x.xxxxx.xxxxx

USB Devices Enabled

The

USB Devices Enabled

field lists the USB devices that are enabled on the system

USB Function [Enabled]

Use the

USB Function

BIOS option to enable or disable the USB function.

Disabled

USB function support disabled

Summary of Contents for AFL-9652 Series








































































































































































































Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands

IEI Technology AFL-9652 Series, User Manual

Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands