IEI Technology AFL-517A-GM45, User Manual

Page: 43 / 136

AFL-517A-GM45 User Manual
Page 43
Figure 2-15: AFL-517A-GM45 Cutout Dimensions (units in mm)
Step 3:
Slide the flat panel PC through the hole until the aluminum frame is flush against
the panel.
Step 4:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the aluminum frame.
Step 5:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 2-16
).
S te p 0 :