IEI Technology AFL-08AH-N270-CR, User Manual

Page: 47 / 115

AFL-08AH-N270-CR Panel PC
Page 33
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the AFL-08AH-N270-CR flat panel PC and the
rack/cabinet into which the AFL-08AH-N270-CR is installed.
Step 1:
Slide the rear chassis of the AFL-08AH-N270-CR flat panel PC through the
rack/cabinet bracket until the aluminum frame is flush against the front of the
bracket (
Figure 4-9
).
Figure 4-9: The Rack/Cabinet Bracket
Step 2:
Insert the rack mounting clamps into the pre-formed holes along the edges of
the flat panel PC, behind the ABS/PC plastic frame. There are a total of 4 rack
mounting clamps.
Step 3:
Tighten the screws that pass through the rack mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the bracket (
Figure 4-10
).