IEI Technology AFL-07A-ATOM-N270/WT-R/1GB User Manual Download Page 4

Page: 4 / 170

AFOLUX AFL-ATOM Series Panel PC

Page IV

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the AFOLUX

AFL-ATOM series or personal injury to the user. Please take warning

messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the AFOLUX AFL-ATOM series. Cautions are easy to recognize. The word

“caution” is written as “

CAUTION

,” both capitalized and bold and is followed. The italicized

text is the cautionary message. A caution message is shown below:

Summary of Contents for AFL-07A-ATOM-N270/WT-R/1GB











































































































































































Search results

Summary of Contents for AFL-07A-ATOM-N270/WT-R/1GB

Reviews:

Brands by name

Popular brands

IEI Technology AFL-07A-ATOM-N270/WT-R/1GB, User Manual

Search results

Summary of Contents for AFL-07A-ATOM-N270/WT-R/1GB

Reviews:

Brands by name

Popular brands