background image

 

 

AFOLUX LX Panel PC

Page 36 

 

Figure 3-10: LAN Connection 

Step 3: 

Insert the LAN cable RJ-45 connector.

 Once aligned, gently insert the LAN 

cable RJ-45 connector into the onboard RJ-45 connector.

 

Step 0:

 

3.8.2 Serial Device Connection 

The AFOLUX LX has two serial device connectors on the bottom panel. The two serial 

device slots (RJ-45) connect to a cable with a standard DB-9 connector at the other end 

(cables included). Follow the steps below to connect a serial device to the AFOLUX LX 

panel PC. 

Step 1: 

Locate the RJ-45 connector

. The location of the RJ-45 serial port connector is 

shown in 

Chapter 2

. The RJ-45 connectors for the serial ports can be identified 

easily as the RJ-45 for the network has two LEDs on the port, while the 

connectors for the serial cables don’t. 

Step 2: 

Insert the RJ-45 to DB-9 cable. 

Step 3: 

Insert the serial connector

.

 

Insert the DB-9 connector of a serial device into 

the DB-9 connector on the cable. See 

Figure 3-11

Summary of Contents for AFL-056A-LX


























































































































Reviews: