IEI Technology AESQ170-969 User Manual Download Page 79

Page: 79 / 121

Chapter 5 BIOS



ACPI Sleep State [S3 (Suspend to RAM)]

Use the

ACPI Sleep State

option to specify the sleep state the system enters

when it is not being used.



S3 (Suspend

to RAM)

DEFAULT

The caches are flushed and the CPU is
powered off. Power to the RAM is
maintained. The computer returns
slower to a working state, but more
power is saved.

5.3.3

AMT Configuration

The

AMT Configuration

menu (

BIOS Menu 5

) allows the Intel

AMT options

to be configured.

BIOS Menu 5: AMT Configuration



Intel AMT [Enabled]

Use

Intel AMT

option to enable or disable the Intel

AMT function.



Disable

Intel

AMT is disabled



Enable

DEFAULT

Intel

AMT is enabled



Un-Configure ME [Disabled]

Use the

Un-Configure ME

option to perform ME unconfigure without

password operation.

Summary of Contents for AESQ170-969


























































































































Search results

Summary of Contents for AESQ170-969

Reviews:

IEI Technology AESQ170-969, User Manual, Page: 79 / 121

Search results

Summary of Contents for AESQ170-969

Reviews: