Wiring the Bell Output to a Speaker:
The SSWiLM keypad has a built in bell button, which triggers a relay output when pressed. This relay is normally open
and the contact closes when triggered. You can use this relay output to trigger devices that require a momentary closure,
such as a doorbell. The relay output provides a dry contact, but you can run up to 24 VDC or 125 VAC through it for
devices that require power to operate. The diagram below shows these connections.
Keypad Mounting Height
Mounting height can vary depending on requirements. An appropriate range is typically between 48 and 52 inches on
center off the floor.
Document # 6050800 Rev 1.1
5 of 12
www.ieib.com
Summary of Contents for 232iLM
Page 9: ...Document 6050800 Rev 1 1 9 of 12 www ieib com PAGE LEFT BLANK INTENTIONALLY ...
Page 10: ...Document 6050800 Rev 1 1 10 of 12 www ieib com PAGE LEFT BLANK INTENTIONALLY ...
Page 11: ...Document 6050800 Rev 1 1 11 of 12 www ieib com PAGE LEFT BLANK INTENTIONALLY ...
Page 12: ...iLM Mounting Template Document 6050800 Rev 1 1 12 of 12 www ieib com ...
