Maintenance
Translation of the original instructions
June 2018
Page 22 of 47
Module 115/42 (B)
MAN_EN_1057398_Module115-42(B)_R3b.doc
4 Maintenance
During the design of the linear module 115/42 or 115/42 B, importance was placed on the use
of low-maintenance components. All roller elements were provided with lifetime lubrication in
the factory.
The guide carriages are equipped with attached lubrication elements and a ball chain. This
makes it possible to achieve a running performance of 10,000 km with initial lubrication. In
single-shift operation, this corresponds to nearly 5 years at a stroke of 500 mm and 20 cycles
per minute.
Once the indicated running output is reached, the guide carriage can be re-lubricated with a
special grease press (IEF-item no.: 1055123) (see
below).
The grease gun is filled with the high-performance lubricant Dynalub.
NOTE
Never use any grease that contains ester oils.
Figure 21: Lubrication of the guide carriage (carriage with external lubrication)
Lubrication nipple
