background image

PAGE 

ii

 

DOC1212B 

REV: 02-13

DNA78X4 DIGITAL NETWORK 4CH POWER AMPLIFIER 

INSTALLATION INSTRUCTIONS

Copyright © 2013 Innovative Electronic Designs, LLC. All Rights Reserved
If this document is distributed with software that includes an end user agreement, this document, as well as the software described 
in it, is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permit-
ted by any such license, no part of this document may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, including photocopying, recording, storage in an information retrieval system, or otherwise, without the prior written 
permission of Innovative Electronic Designs, LLC. Please note that the content in this guide is protected under copyright law even if 
it is not distributed with software that includes an end user license agreement.
The content of this document is furnished for informational use only and is subject to change without notice. It should not be con-
strued as a commitment by Innovative Electronic Designs, LLC. Innovative Electronic Designs, LLC assumes no responsibility or 
liability for any errors or inaccuracies that may appear in the informational content contained in this document.
Any reference to company names in examples are for demonstration purposes only and are not intended to refer to any actual 
organization or an endorsement of any kind.
Innovative Electronic Designs, IED, GLOBALCOM, 500ACS, 500ACS Announcement Control System, CAS, Courtesy Announce-
ment System, T-CAS, FAS, Flight Announcement System, IED On Call, IED On Call & Design, and LANcom are all registered trade-
marks or trademarks of Innovative Electronic Designs, LLC in the United States and/or other countries.
CobraNet is a registered trade mark of Cirrus Logic in the United States and/or other countries.
Microsoft, Windows, Windows Vista, Windows 7, Windows Server, SQL Server, and Internet Explorer are all registered trademarks 
or trademarks of Microsoft Corporation in the United States and/or other countries.

Innovative Electronic Designs, LLC

9701 Taylorsville Road

Louisville, KY 40299

United States of America

www.iedaudio.com

Document Number: 1212B

Summary of Contents for DNA7874L





















Reviews: