3.
Operation
3.1.
Preparation
Before starting the machine, be sure to observe whether there are people in the working area of the
machine to ensure safety.
Before starting the machine, be sure to tidy the machine table to ensure that there are no sundries in
the X \ y drag chain slot during starting.
Check whether the y-direction guide rail has lubricating oil.
Check whether the air pressure reaches 0.6MPa.
Check whether the tool selection and installation are correct.
3.2.
Steps
Power on the machine.
The cutting machine starts to reset. Reset process: head height reset, X and Y direction reset, head
rotation reset, head moving to the origin position.
Adjust the tool depth of the machine head to avoid cutting the felt.
Lay the materials to be cut on the cutting table, and turn on the vacuum pump to make the cutting
materials adsorb on the cutting table smoothly. If it is a breathable material, it needs to be covered
with film.
Open "IECHO digital cutting system" and import the sample file designed by the user (the data
format can be DXF, PLT, PDF, HPG, HPGL, TSK, BRG, XML, cut, oxf, ISO, AI, PS, EPS, etc.). The system
