Innovative DisplayWorks
G-11/GCG-11c
Instruction Manual
STARTUP, OPERATION AND TEMPERATURE ADJUSTMENT
Operation
• Prior to stocking cooler with product, it should be operated empty for half an hour.
Temperature Adjustment
Lit Door “Logo” Switch
Operation
• The light switch located at the bottom left hand side on the rear of the
cabinet is the ON/OFF switch for the Lit logo located on the door of cooler.
REPAIR AND MAINTENANCE FOR REFRIGERATION DRAWER
* A CERTIFIED TECHNICIAN IS REQUIRED TO REPAIR ALL REFRIGERATION COMPONENTS
FOR WARRANTY PURPOSES.
For convenient repair, the refrigeration components (compressor, evaporator, condenser,
evaporation fan, condensation fan and filter) are designed using a split
system; any component can be easily replaced. Replacement procedure is
as follows:
1
Unplug the unit.
2
Remove the screws from the front grill, and then remove the grill.
3
Unplug all connections and terminals that are in need of repair.
•
G-11c/GCG-11c performance testing position of the thermostat is around 4.5-6.
4
Using a screwdriver, remove screws
from refrigeration drawer.
5
Slide the Refrigeration Drawer out to easily access
refrigeration components. Remove the component to replace or repair.
6
After repair, re-install all parts using the reverse procedure.
4 Page9
REPLACING THE CANOPY LIGHT
1
Unscrew the Graphics Holder on the Left Hand Side of the Top Canopy
2
Carefully slide out the entire Graphics piece.
6
To install LED light parts, follow the above directions in reverse order.
3
Disconnect the LED light wiring.
5
Remove LED light parts.
4
Pull out the LED light parts from the two clips.
10
9
