Idview Digital i Alarm DVR, User Instruction Manual, Page: 42 / 70

User Instruction Manual
42
and alarm situations of triggered zone and the host device will automatically
dial the preset alarm phone. There will be voice prompt in receiving the call.
The following actions can be taken on the alarm phone by following the
corresponding voice prompt.
Press
【
1
】
button
：
Clear alarms
Press
【
2
】
button
：
Search the alarmed zone
（
The operation can be repeated
）
Press
【
3
】
button
：
System disarm
Press
【
4
】
button
：
System arm
Press
【
5
】
button
：
System stay arm
Press
【
6
】
button
：
Activate siren on site
（
The operation can be repeated
）
Press
【
0
】
button
：
Hang up
If no alarm handling or no other undefined keys are pressed after 10 seconds,
the alarm process will continue. If the user does not press 1 to clear the alarms
or press 3 to disarm system, the host device will continue to dial other preset
telephones to report the alarm. After the alarm is cleared, the host device will
restore to the original state before alarming.
Remote Control
Use other phones to dial the phones connected to the host device. The host
device will automatically pick up the phone after preset ring time(less than the
local communication automatic hang up times) elapsed. Input user name and
password on the phone by following the voice prompt. If it is passed the
verification, then follow the voice prompt and take the following operations.
Press
【
1
】
key
：
System arm
Press
【
2
】
key
：
System disarm
Press
【
3
】
key
：
System stay arm
Press
【
4
】
key
：
Inquiry of system status
（
The operation can be repeated
）
Press
【
0
】
key
：
Hang up
3.3.2.1.6 Password Setup