IDUINO for maker’s life
www.openplatform.cc
Shield Overview
The data log shield has a few things to make it an excellent way to track data. Here's a
rough map of the shield:
SD Card
The big SD card holder can fit any SD/MMC storage up to 32G and and small as 32MB
(Anything formatted FAT16 or FAT32) If you have a MicroSD card, there are low cost
adapters which will let you fit these in. SD cards are tougher to lose than MicroSD, and
there's plenty of space for a full size holder.
Simply Push to insert, or Pull to remove the card from this slot
The SD Activity LED is connected to the clock pin, it will blink when data goes over SPI,
which can help you detect when its ok to remove or insert the SD card or power down
the Arduino.
