R-DT-EVO-TEMIC-USB, R-STICK-EVO-TEMIC
Selecting Commands
EVO Readers
iDTRONIC GmbH
Page 5 of 7
<ADDR>
string of 1 character - block to write, valid values from “0” to “7”.
The page is always “0” , the “1” page cannot be written.
The default expiry timeout is 100 milliseconds
2.5
Block Write Protected
This command allows you to write a single block of page “0” when the PWD tag is set to “1”.
STX ADDS1 ADDS2
“7” <PSW> <LOCK> <DATA> <ADDR>
ETX BCC
“7” command type 'Block write Protected’.
<PSW>
string of 8 characters, hexadecimal, password to write, valid value “0123456789ABCDEF”
<LOCK>
string of 1 character - Lock bit for the selected block, valid values “0” and “1”
(ATTENTION, after set to 1 a value it cannot be reset to 0 and the block cannot be changed.)
<DATA>
string of 8 characters, hexadecimal, data to write on the block, valid values
“0123456789ABCDEF”.
<ADDR>
string of 1 character - block to write , valid values from “0” to “7”.
The page is always “0” , the “1” page cannot be written.
The default expiry timeout is 100 milliseconds
2.6
Wake-up Command (AOR)
This command allows you to enable the transponder modulation if the bit AOR was set to "1".
STX ADDS1 ADDS2
“8” <PSW>
ETX BCC
“8” command type 'Wake-up’.
<PSW>
string of 8 characters , hexadecimal, password valid value “0123456789ABCDEF”
The default expiry timeout is 100 milliseconds.
2.7
Reset Tag
Send to the transponder a reset command.
STX ADDS1 ADDS2
“9”
ETX BCC
“9” command type 'Reset tag’.
The default expiry timeout is 100 milliseconds