Copyright © 2021, iDTRONIC GmbH
Reproduction, adaption or translation without prior written permission is prohibited, except as allowed
under copyright laws. The information contained in this document is subject to change without notice.
Connecting to the read/write Software RFIDReader.exe
When you installed the driver and be sure that the reader is in read/write mode you can connect with the
“
RFIDReader.exe
”
software.
First connect the reader, then open the software, the right comport should be automatically selected by the
software. Then c
lick on “connect” to connect with the reader. For more information about this software, please
refer to our SDK.
The link to the SDK you find on the on the bottom or on our website :
Download SDK and get support
https://tinyurl.com/y3jzov64
