background image

 
                                                                                                                   
   

STAR RFK101 

PROXIMITY READER 

ID-TECK

9. FCC REGISTRATION INFORMATION

FCC REQUIREMENTS PART 15 

Caution:

 Any changes or modifications in construction of this device which are not expressly approved 

by the responsible for compliance could void the user's authority to operate the equipment. 

NOTE: This device complies with 

Part 15 of the FCC Rules

Operation is subject to the following two conditions; 

1. This device may not cause harmful interference, and 

2. This device must accept any interference received, including interference that may cause undesired 

operation. 

This equipment has been tested and found to comply with the limits for a 

Class A Digital Device

pursuant to 

Part 15 of the FCC Rules

. These limits are designed to this equipment generates, uses, and 

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined by 

turning the radio or television off and on, the user is encouraged to try to correct interference by one or 

more of the following measures. 

1. Reorient or relocate the receiving antenna. 

2. Increase the separation between the equipment and receiver. 

3. Connect the equipment into an outlet on another circuit. 

4. Consult the dealer or an experienced radio/TV technician for help. 

RFK101-20011219              

  - 13 -                   

 

Summary of Contents for Star RFK101















Reviews: