IDTECK Star iCON100SR, User Manual

Page: 70 / 90

SETTING CHANGES p.64
d vice versa. To change the memory partition setting, press <ENT>, and press <4> or <6> to s
elect 10000/50000, 20000/40000, 30000/30000, 40000/20000 or 50000/10000 (No. of ID
s / No. of Events), and then press <ENT> again to confirm.
The event memory must be emptied prior to changing this setting. If you attempt t
o change the setting with some event data still in the memory, the LCD will display
“EVENT MEMORY NOT EMPTY” error message.
If you attempt to reduce the ID memory size to a value lower than the current num
ber of IDs stored in the memory, the LCD will display the “ID TOTAL COUNT WRON
G” error message.
3.6 Event List
The number of registered user IDs is displayed. This count automatically increases or decreas
es as IDs are registered or deleted. The LCD on the left shows that the sum totals of 123 use
r IDs are registered in the memory. And ‘MAX’ is the maximum registerable ID number
3.7 Event Count
The number of event transactions is displayed. This count automatically increases or decreas
es as new events occur or the existing events are uploaded to the PC. The LCD on the left sh
ows that the sum totals of 12345 event transactions are stored in the memory. And ‘MAX’ is
the maximum registerable event number