IDTECK Star iCON100SR, User Manual

Page: 67 / 90

p.61 Setup Menu F3
RD (Reader Code)
To use both Reader 1 and 2 for the cardholder. Enter 0. To use just Reader1, enter 1.
To use just Reader2, enter 2.
The TS and RD fields do not appear if the Star iCON100 is set in Reader Mode.
3.2 ID Deletion
ID Delete allows you to delete existing cards from the iCON100. To delete an existing card
(Or ID), press <ENT>.
Either present a card you wish to delete to the iCON100 or enter the card number (ID) via th
e keypad and press <ENT>.
If the card was successfully deleted, the “DELETE SUCCESS!” message will be displayed on th
e LCD. If the card you presented or the card number you entered is not found, the “UNREGIS
TERED ID” message will be displayed.
3.3 ID List