IDTECK Star 100R Manual Download Page 27

Page: 27 / 71

p.21

Registration of RF/PIN Combination MODE

1. Apply 12V DC to the unit.

All 3 LEDs will be flashing along with a powered-up melody (do mi sol me do do mi sol

do~).

Press

from the keypad. (PIN ONLY MODE)

Enter

to register Configuration PIN then

to registe

r for each subsequent User Access PIN at a time and then enter the

(Configuration PIN) to complete the registration.

The first 4~6 digit PIN becomes the Configuration PIN and the subsequent 4~6 digit PI

Ns are registered as User Access PINs. Once all User Access PINs have been registered, e

nter the Configuration PIN again to complete the registration. (Please store the Configu

ration PIN for future changes.)

Now, the Main Unit is entered into the normal operation mode with factory defaulted s

ettings.

Registration of RF/PIN Combination MODE

Apply 12V DC to the unit.

All 3 LEDs will be flashing with a power-up melody.

Press

from the keypad. (RF/PIN Combination Mode)

Present Configuration Card to register Configuration Card to the unit.

Present RF Card or enter 4~6 digit PIN number to register user access card or PIN.

Present Configuration Card to complete the registration

Summary of Contents for Star 100R








































































Search results

Summary of Contents for Star 100R

Reviews:

Related manuals for Star 100R

Brands by name

Popular brands

IDTECK Star 100R, Manual

Search results

Summary of Contents for Star 100R

Reviews:

Related manuals for Star 100R

Brands by name

Popular brands