manualshive.com logo in svg

IDTECK iPASS IPK505, User Manual, Page: 7 / 32

Share
Download
IDTECK iPASS IPK505 User Manual Download Page 7

 
 
                                                                                                                 

   

 

 

7  

5. Identifying Supplied Parts 

 

Please unpack and check the contents of the box.   
(Optional accessories, if purchased, may be included in the package) 

 
 
 
 
 
 
 

Main Unit 

Wall Mount 

O-ring 

User’s Manual 

( 1ea ) 

( 1ea ) 

( 5ea ) 

( 1copy) 

 

6. Product Overview 

 

6.1

6.2

6.2.1 

 Functions 

   

Current Time Display on the LCD 

The 

Star RFK505 / iPASS IPK505 / IDTEKC SRK505U 

displays card reading status, card 

number and current time on the LCD.

Setting Changes   

The 

Star RFK505 / iPASS IPK505 / IDTEKC SRK505U 

manages output mode setting, 

external buzzer control and external LED control. 

Keypad 

If the 

Star RFK505 / iPASS IPK505 / IDTEKC SRK505U

 is not connected to a host PC,   

the integrated keypad and LCD display module can also be used for the entire programming 
process. 

 

 Product Explanation 

 

Front Panel Description 

 

   

 

 

 

 

 

 

               

     

 
 
 
 
 
 

 

10 Numeric Keypad

 

Card Reading   

Status LED 

LCD Display 

System Operation   
Status LED 

 

Function Keypad

 

 
 
 
 
 
 
 
 

                Figure: 

Star RFK505 / iPASS IPK505 / IDTEKC SRK505U 

Front Description 

 

Summary of Contents for iPASS IPK505

































Reviews:

No comments