Model
ILAN422/485
Manual Connection
Guide
1
1. Connection via RS422 (for ILAN422 converter)
a. DIP Switch Setting
For RS422 communication, you should set the DIP switch to the 422
position as shown in the picture below.
b. Connection Table
2. Connection via RS485 (for ILAN485 converter)
a. Dip Switch Setting
For RS485 communication, you should set the DIP switch to the 485
position as shown in the picture below.
Star 505R / FINGER007
ILAN422 Converter
RX+ (Brown Wire)
T+
RX- (Blue
Wire)
T-
TX+ (Gray
Wire)
R+
TX- (Yellow
Wire)
R-
iCON100 / iTDC
ILAN422 Converter
RX+ T+
RX- T-
TX+ R+
TX- R-
The operating voltage may vary depending on the
country. Check the voltage of your power adapter.
Note