User management
100RV
p.23
When the mode is specified, only the green LED indicator flashes.
2.
Press Button
and Button
in sequence and press
.
When the device enters Standby, only the red LED indicator flashes.
3. Present cards or PIN numbers (4-6 digits) to register with the device one after another,
and the device will register them with a beep.
Repeat this step if you want to register multiple cards or PIN numbers.
4.
Present the Master PIN number to the device again, and the device will switch to
normal mode.
If no input is made for 20 seconds, the device will switch to normal mode.
The door may be accessed in two ways: using the card or the PIN number.
5
To delete a registered card or PIN number
Ensure that you must have registered the Master Card or the Master PIN number and the
device is specifi ed in a certain mode.
This is applicable in all modes.
1.
Enter the Master Card or Master PIN.
When the mode is specified, only the green LED indicator flashes.
2. Press Button
and Button
in sequence and press
.
When the device enters Standby, only the red LED indicator flashes.
3.
Present a card or PIN number to delete.
Repeat this step if you want to register multiple cards or PIN numbers.
4. Present the Master card to the device again, and the device will switch to normal
mode.
If no input is made for 20 seconds, the device will switch to normal mode.
