IDTECH VP7200, User Manual

Page: 18 / 30

ID TECH VP7200 User Manual
Page | 18
8.6. Connecting to the Data Port
The VP7200 has three data connection options: USB, RS-232, and Ethernet through the USB-C connector.
USB-C Connector
PIN#
Function PIN# Function
A1 GND B12 GND
A2
RS232_TX
→
B11
RS232_RX
←
A3 RS232_RTS
→
B10 RS232_CTS
←
A4 VBUS B9 VBUS
A5 CC1 B8 LINEOUT_R
A6 USB_DP B7 UART_TX →
(3.3V IO)
A7 USB_DN B6 UART_RX
←
(3.3V IO)
A8 LINEOUT_L B5 MIC_DET
A9 VBUS
B4 VBUS
A10 ETHERNET_RXN B3 ETHERNET_TXN
A11 ETHERNET_RXP B2 ETHERNET_TXP
A12 GND B1 GND
8.7. Installation Checklist
When installing VP7200 units, be sure to verify the following items.
8.7.1. Visual Inspection
Before installinga VP7200:

Visually inspect the reader for any modifications on the plastic housing.

Check the security labels over the screws to verify the reader has not been tampered with.

Power up the reader and check for any flashing LEDs and beeps that indicate tampering. Refer
to
Tamper and Failed Self-Check indicators for specific information.
8.7.2. Installation Procedures
After visually inspecting the VP7200, follow these guidelines when integrating the reader to your system:

Insert any Security Access Modules into the SAM sockets.

For additional memory expansion, insert any microSD card into the uSD socket.

If your unit supports LTE radio, insert your network SIM into the SIM sockets.

Close the cover and install the unit in its housing using four screws. Note: Do not overtighten
the screws.

If the display module is supported, insert the display module flex into the optional LCD
connector.

Insert the communication/power cable into the USB-C connector and tighten the locking screws
(if provided).

Power on the whole system and check the unit’s operations.
8.7.3. Recommendations
Additionally, follow these recommendations after installation:

Periodically inspect the system for any tampering and insertion of electronic bugs.

Look for the latest updates on the manual or firmware on the IDTECH website.