5
Before You Start Using the ViVOpay VP3600
The ViVOpay VP3600 is a mobile device for reading magnetic-stripe cards and ICC ("chip")
cards. VP3600 is designed to operate in conjunction with certified third party payment
software and compatible host devices such as Bluetooth and or USB equipped tablets and
smartphones (host device). Before you connect the VP3600 to the host device, install and
activate the software application according to the instructions provided by your payment
application service and software provider, then connect the VP3600 to the mobile device
through the Bluetooth or through a micro-USB cable (not included) and enjoy the
convenience of mobile payment processing offered by the VP3600.
Battery Charging Instructions
Your ViVOpay VP3600 is powered by a lithium ion polymer battery and is delivered in a
partially charged state. You should fully charge it before using it for the first time. Allow
4-6 hours for the initial charge.
To charge the unit: Use a USB to micro-USB cable (not included) to charge the unit.
Battery Status When Charging the Battery
The ViVOpay VP3600 can be connected to a host via USB-to-micro-USB cable, or
Bluetooth. Connecting with a cable allows the VP3600 to charge its internal battery using
USB power. A battery indicator will appear on the LCD screen to display current battery
charging status.
LCD Display for Power Management
The LCD displays the battery status during operation.
When the battery is low, a warning message will appear on the LCD.
LCD Display During Transactions and Operation
ICC processing: LCD displays status during transaction. Do not remove card until the
LCD display shows the transaction has been completed.
ICC process successful: LCD display shows the transaction successful. At this point,
please remove card.
