ID TECH ViVOpay VP3320 User Manual
Page | 8
4.
Before You Start Using VP3320
The VP3320 is a mobile device for reading ICC ("chip") cards. The VP3320 is designed to operate in
conjunction with certified third-party payment software and compatible host devices such as
Bluetooth- or USB- equipped tablets and smartphones. Before connecting the VP3320 to the
host device:
1.
Install and activate the software application service according to the instructions provided
by your payment application service and software provider.
2.
Connect the VP3320 to the host mobile device through via Bluetooth or a micro-USB
cable.
4.1.
Bluetooth Pairing Instructions
In addition to the following instructions, see the section on
information on using an iPad or iPhone in conjunction with the VP3320.
1.
Enable the Bluetooth device search function on the host device (smart phone or
tablet).
2.
Make sure the VP3320 is charged or connected to a power source via USB.
o
When connected to a power source, the VP3320 automatically activates
Bluetooth.
3.
When not connected to a power source, press the VP3320’s Bluetooth function
button to activate Bluetooth. The button is located on the bottom of the case.
4.
Find a Bluetooth device named
IDT####
on the host smart phone or tablet and select
Pair
(#### is the last four digits of the device’s serial number; for example, IDT1701).
5.
Enter the password for pairing. The default password is 654321.
6.
Follow the payment transaction instructions provided by a compatible payment
application maker to complete a transaction.
The VP3320 will remain connected via Bluetooth to the host device indefinitely when powered via
the USB cable. If the unit is operating on battery power, it will go to sleep after 30 seconds of
idling to extend battery life. To perform a transaction again, press the Bluetooth function button
to re-establish the Bluetooth connection.
When connecting to an iOS device, please install a compatible payment application and follow the
instructions provided by that application’s maker. See
iOS Connectivity: BLE and VP3320
for more information.
4.2.
Battery Charging Instructions
The VP3320 is powered by a lithium-ion polymer battery and is delivered in a partially charged
state. Be sure to fully charge the VP3320 before using it for the first time. Allow four to six hours
for the initial charge.
Use a standard USB to micro-USB cable to charge the unit. An LED battery indicator displays the
current battery charging status.
