ID TECH Spectrum Air User Manual
Copyright © 2020, International Technologies & Systems Corporation. All rights reserved.
Page | 3
Revision History
Revision
Date
Description of Changes
By
50
05/07/2012
Initial draft
JW
A
08/06/2012
Initial release
JW
12/30/2012
Updated Appendix A
BK
B
05/05/2013
•
Remove the TTL part
Remove conformal coated PCA from features
CH
C
05/08/2013-
03/14/2014
•
Enumeration SN and special terminator CRLF Clarify
configuration 1C setting bits
•
Correct Original and Enhanced Encryption Format
Added Encryption Field 8 and 9 definitions Updated
HID block Size
•
NGA flag added to Status report 2 byte
Added Raw track prefix or sync char if KB mode Corrected
PID for standard and secure HID/HIDKB
BK
D
10/13/2015
•
Correct 72, 73 & 84 descriptions; add loop and
Service Code support; clarify field 8;
E
12/16/2015
•
Added Minor version support; Added review
Encryption settings
BK
F
05/27/2016
Documented features added with Version V2.89.
BK
G
07/21/2016
Document feature (card present and different error
response codes) added with Version 2.90
BK
H
08/21/2017
Added section 5.1 for physical mounting
JH
J
05/10/2019
Reformatted and repaginated document
Added Table of Contents
Installation 4.2: Added a section about installing a drain
wire in cases of ESD
CB
K
02/17/2020
Font update.
Added info about compatible Molex parts in Pin Out info.
Removed Command documentation.
CB
L
07/7/2020
Added mounting info.
CB
M
08/18/2020
Added horizontal mounting disclaimer.
CB
N
09/10/2020
Added exploded mounting drawing to Appendix B.
CB
