ZWIR4512 Application Note - Development Kit Getting Started Guide
© 2016 Integrated Device Technology, Inc.
9
April 15, 2016
9. Start debugging:
a. On the main menu bar, click
Debug
Go
(or press F5).
b. Wait until the application was loaded successfully at the microcontroller.
Note: if uploading errors occur, try the uploading again.
10. Start the program by pressing the
Continue Execution
button
on the main menu or press F5.
Figure 3.5
CrossStudio™ in Debugging Mode
It is possible to debug the uploaded program in CrossStudio™. All debug features are explained in CrossStudio’s
Help function accessible via the main menu.
