IDT ZSSC4151 Hardware Manual Download Page 1

 

 

 
 

 

 

 

ZSSC4151 Evaluation Kit Hardware Manual 

© 2016 Integrated Device Technology, Inc. 

March 11, 2016 

 

Important Notes 

Restrictions in Use 

IDT’s ZSSC4151 SSC Evaluation Kit, consisting of the SSC Communication Board (SSC CB), ZSSC415x/6x/7x Evaluation Board (SSC 
EB), Sensor Replacement Board (SSC RB), and Evaluation  Software, is designed for sensor module evaluation, laboratory setup, and 
module calibration development only. IDT’s SSC Evaluation Kit hardware and software must not be used for module production or 
production test setups. 

The related product ZSSC4151 SSC Mass Calibration System is designed only for development, evaluation, and laboratory setup of 
sensor modules with IDT Sensor Signal Conditioner ICs. The IDT Mass Calibration System hardware and software must not be used for 
module production and production test setups. 
 

Disclaimer 

IDT shall not be liable for any damages arising out of defects resulting from  

(i)   delivered hardware or software  
(ii)   non-observance of instructions contained in this manual and in any other documentation provided to user, or  
(iii)  misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT.  

To the extent permitted by law, IDT hereby expressly disclaims and user expressly waives any and all warranties, whether express, 
implied, or statutory, including, without limitation, implied warranties of merchantability and of fitness for a particular purpose, statutory 
warranty of non-infringement, and any other warranty that may arise by reason of usage of trade, custom, or course of dealing.

 

Contents 

1

 

Evaluation Kit Contents and Overview ............................................................................................................. 3

 

2

 

ZSSC415x/6x/7x Evaluation Board .................................................................................................................. 5

 

2.1.

 

Overview .................................................................................................................................................... 5

 

2.2.

 

ZSSC415x/6x/7x SSC Evaluation Board Schematic ................................................................................. 6

 

2.3.

 

Connections between the Communication Board and ZSSC415x/6x/7x Evaluation Board ..................... 7

 

2.4.

 

Connections between the Sensor Replacement Board and the Evaluation Board ................................... 7

 

2.5.

 

Connections between the ZSSC4151 IC and the Evaluation Board ......................................................... 8

 

3

 

Ordering Information ........................................................................................................................................ 9

 

4

 

Related Documents .......................................................................................................................................... 9

 

5

 

Glossary ........................................................................................................................................................... 9

 

6

 

Document Revision History ............................................................................................................................ 10

 

 

Summary of Contents for ZSSC4151











Reviews: