ZNRG2061 Evaluation Kit User Manual
© 2017 Integrated Device Technology, Inc.
7
March 29, 2017
1.4
Power-up
After installing the GUI as described in section 1.2.2 and setting up the kit hardware as described in section1.3, use the micro-USB cable to
connect the USB connector to an available USB port on the user’s computer as shown in Figure 4. Then activate the GUI to control the
Evaluation Board.
Note: When the Evaluation Board has power, the POWER LED will be on (see Figure 2).
Figure 4. Evaluation Board Connections to Current Transformer and User’s Computer
USB
X2 Connector
X1 Connector
100:100
*
The asterisk indicates pin 1.
*
*
