IDT ZMOD4410 User Manual Download Page 20

 

ZMOD4410 Evaluation Kit User Manual 

 

© 2019 Integrated Device Technology, Inc. 

20 

April 3, 2019 

 

6.

 

Ordering Information 

Orderable Part Number 

Description 

ZMOD4410-EVK-HC 

ZMOD4410 Evaluation Kit including the ZMOD4410 Sensor Board, ZMOD4410 HiCom Communication Board 

(USB Interface), and Micro-USB Cable. (The ZMOD4410 Evaluation Software is available for download free of 
charge on 

www.IDT.com/ZMOD4410-EVK

.) 

 

7.

 

Revision History 

Revision Date 

Description of Change 

April 3, 2019 

Updates on Odor operation mode. 

November 1, 2018 

Updated with Low Power operation mode. 

September 25, 2018 

Updated with Odor operation mode. 

May 19, 2018 

Initial release.  

 
 

 

Corporate Headquarters 

6024 Silver Creek Valley Road 
San Jose, CA 95138 

www.IDT.com

  

 

Sales 

1-800-345-7015 or 408-284-8200 
Fax: 408-284-2775 

www.IDT.com/go/sales

  

 

Tech Support 

www.IDT.com/go/support

  

 
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at an y time, 
without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are  determined in an independent state and are not guaranteed to perform the same 
way when installed in customer products. The information contained herein is provided without representation or warranty of a ny kind, whether express or implied, including, but not limited to, the suitability 
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not 
convey any license under intellectual property rights of IDT or any third parties. 
 
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems  or similar devices where the failure or malfunction of an IDT product can be 
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does  so at their own risk, absent an express, written agreement by IDT. 
 
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trade marks used herein are the 
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visi

www.idt.com/go/glossary

All contents of this document are copyright of Integrated 

Device Technology, Inc. All rights reserved. 

Summary of Contents for ZMOD4410





















Reviews: