5. Configuration Registers
64
Tsi310 User Manual
80B6020_MA001_05
5.1.2
Configuration Space
The PCI and PCI-X specifications define a separate address space called the configuration space
in which the configuration registers are located. It is a contiguous block of 256 bytes,
subdivided into two regions:
1.
The first 64 bytes are the PCI configuration space header region, which provides for
identification, configuration, and recovery capabilities.
2.
The remaining 192 bytes are the PCI device dependent region, which provides for device
specific configuration data. Modification of the reserved bits contained within this region
may have serious and unpredictable effects on the operation of the Tsi310.
In addition, there are two versions of the PCI configuration space:
1.
The standard configuration is often referred to as a Type 0 PCI configuration space header
because the value x‘00’ is stored in the PCI header type register (at offset x‘0E’).
2.
The PCI-to-PCI bridge configuration is often referred to as a Type 1 PCI configuration
space header because the value x‘01’ is stored in the PCI header type register (at offset
x‘0E’). This chapter provides a specification for only the Type 1 PCI configuration space
header.
The mandatory PCI configuration space registers perform these operations:
•
Detect PCI devices and their functions
•
Initialize PCI devices
•
Assign system resources to PCI devices
•
Support catastrophic error recovery
5.1.3
Type 1 PCI Configuration Space Header
The 64-byte PCI configuration space header region has two subregions (see
•
The first 16 bytes are the PCI device independent region
•
The remaining 48 bytes are the PCI Device Header Type region
Summary of Contents for Tsi310TM
