6 of 13
Press and release the
SCAN
button to activate the All Scan function. The SCAN and ALL indicator appears
on the LCD during All Scan. In All Scan mode, all channels in the channel set are scanned in sequence
except the channel set as Cancel channel using SKIP button operation. After the last channel number has
been scanned, the cycle repeats.
3CH Scan ( Favourite Channels Scan)
Press 3CH button into 3CH shortcuts button when there is at least one favourite channel
Press and release the
SCAN
button to start 3CH Scan , the SCAN indicators appear on the LCD. Only the
favourite channels and priority channels (CH16) are scanned in sequence.
Your radio can store up to three favourite channels. The favourite channels are the ones scanned in
the 3CH Scan mode. Press 3CH shortly can access these favourite channels as shortcuts
To Add Channels to 3CH List
During normal operation mode, use the UP or DOWN key to select the desired channel for
programming.
Press and hold the
3CH
button for 3 seconds. The "C1" icon appears to indicate the current channel
has been saved in first favourite channel. The similar to the second and third favourite as C2 and C3
respectively. Any number of channels can be saved as favourite channels
To Delete Channels from 3CH List
Press 3CH shortly into 3CH shortcuts mode, press 3CH repeatedly until the channel to be deleted.
Press and Hold 3CH button more than 3 seconds until the “Cn” disappears
Monitor Modes (Dual Watch)
The Watch Modes monitor the programmed Priority Channel (CH16) and other user selected channel. The
watch is halted when activity is detected on a monitored channel.
Press SCAN shortly to activate the Dual Watch mode. The "DW" indicator appears on the LCD. Dual Watch
monitors the current working channel and Channel 16 in cycle. Press SCAN button to terminate Dual Watch
and return to the previous working channel.
Note: During Dual Watch mode, the SCAN and Channel
/
(UP/DOWN) button are inactive and
sounds an error beep if pressed.
Monitor modes are terminated when the PTT once pressed.
NOAA WEATHER CHANNELS
To receive a NOAA weather channel, press the [WX] key from any channel. The transceiver will go to the
last selected weather channel.
Press the
/
(UP/DOWN )
button to scroll through the available channels.
To exit from the NOAA weather channels, press the [WX] key. The transceiver returns to the channel it was
on prior to a weather channel. Or press 16/9 to access the priority channels
NOAA WEATHER ALERT
In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic
and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent
weather report on one of the NOAA weather channels.
When the Weather Alert feature is enabled, the transceiver is capable of receiving this alert
In the Weather channel, Press and hold Wx button more than 3 seconds to active the Alert function, LCD will
appears “ALT”. To cancel the alert function, Press and hold WX button more than 3 seconds again, the “ALT”
