8A3xxxx 48QFN EVK User Manual
© 2019 Integrated Device Technology, Inc.
13
February 15, 2019
5. In order to connect the board with Timing Commander (PC), click the button (red circle) at the up-right corner of the GUI to set up the
communication protocols (see Figure 7).
After I
2
C and one-byte addressing are selected, click OK to close the window.
Figure 8. Setting I
2
C for Connecting the Board with GUI
6. Click on the chip symbol at the upper-right corner to initiate the connection. The connection is valid when a green band appears at the
upper-right corner of the window, as shown below.
Figure 9. A Green Band appears when a Valid Connection is Made
