IDS X64, Quick Programming Manual

Page: 12 / 36

IDS X64 Quick Programming Guide 700-398-03A Issued August 2010
12
LOCATIONS 61-68 Primary Account Codes (Partitions 1- 8)
[#] [INSTALLER CODE] [*] [LOCATION] [*] [PRIMARY ACCOUNT CODE] [*]
Location = 61 – 68
LOCATIONS 71-78 Secondary Account Codes (Partitions 1- 8)
[#] [INSTALLER CODE] [*] [LOCATION] [*] [SECONDARY ACCOUNT CODE] [*]
Location = 71 – 78
LOCATIONS 101-164 Zone Type Properties (Zones 1 – 64)
[#] [INSTALLER CODE] [*] [LOCATION] [*] [BITMAP] [*]
Location = 101 – 164
LED ON / OFF Zone Properties LED ON / OFF Zone Properties
1
ON Tamper by Zone Enabled
9
ON Stay Profile 1
OFF Tamper by Zone Disabled OFF
2
ON Cross-zone Enabled
10
ON Stay Profile 2
OFF Cross-zone Disabled OFF
3
ON Shutdown Zone Enabled
11
ON Stay Profile 3
OFF Shutdown Zone Disabled OFF
4
ON Silent Zone Enabled
12
ON Stay Profile 4
OFF Silent Zone Disabled OFF
5
ON Chime Zone Enabled
13
ON Buzz Profile 1
OFF Chime Zone Disabled OFF
6 14
ON Buzz Profile 2
OFF
7 15
ON Buzz Profile 3
OFF
8 16
ON Buzz Profile 4
OFF
Default values are shaded
LOCATION 171 No Movement Auto Arm Time Out (default = 00)
[#] [INSTALLER CODE] [*] [1] [7] [1] [*] [PARTITION NUMBER] [*] [AUTO ARM TIME OUT] [*]
Partition number = 1 – 8
Auto arm time out = 01 – 23, with 00 to disable
LOCATION 172 No Movement Auto Arm Start (default = 0000)
[#] [INSTALLER CODE] [*] [1] [7] [2] [*] [PARTITION NUMBER] [*] [HHMM] [*]
Partition number = 1 – 8
HHMM = 00h00m – 23h59m,