IDS IDS-iSYS, User Manual

Page: 44 / 263

2-3-5- SETUP menu
Contains a list of all the tests developed for the analyser.
Selecting one from the list displays the set-up of the test: steps of
the assay, calibrators and controls, handling volumes, incubation
time, etc.
Some elements can be modified by the Supervisor (such as units or
controls), others can only be viewed.
Contains a list of tests that can be run on the analyser.
Allows the user to program reflex tests. Depending upon defined
conditions, the result of an analyte obtained for a sample can trigger
additional assays on the same sample (see page 156).
Allows access to the list of all products and suppliers stored in the
system
.
Allows the user to create an unlimited number of profiles which can
be used for programming.
For removable-tray configuration:
Allows the operator to define for each removable rack:
•
the type of rack:
- M (mixed): for samples, calibrators and controls
- 1.25D ME: dedicated for 1,25 D immunopurified samples
(manual extraction)
•
the default sample container for the rack: tube, cup, ….
•
the start option : automatic or on demand start.
Allows the operator to personalise the system:
•
Local System: selection of printing options, automatic validation
of results, automatic transfers to the LIS; activation of sound
alarms; programming of automatic start-up and shut-down.
•
Languages: selection of user language.
•
Operators: programming of access level and user authorisation
(name and access code).
User Interface Software
2-3-
Menus (continued)
IDS-iSYS User Manual - Revision M1
User Interface Software 2-3
30
Software version V 14