January 2020
8
Technical Manual: GigE uEye FA
5 GigE uEye FA
Housing/board-level
+/-
Dimensions height x width x length
41 x 53 x 42.7 mm
Mechanical specifications
IP code
IP 65
·
Protection against penetration of dust: No ingression of dust at
a vacuum of 20 mbar in the housing
·
Protection against water (out of a nozzle) from all directions
Test conditions: Using a jet nozzle with an inside diameter of
6.3 mm, a jet of water at a volume flow of 12.5 liters per minute
is applied to the housing from all directions at a distance of
2.5-3 m. The testing period is at least 3 min.
IP 67
·
Protection against penetration of dust: No ingression of dust at
a vacuum of 20 mbar in the housing
·
Protection against ingress of water in case of temporary
immersion
Test conditions: The housing is dipped completely under water
in a dip tank. The submerged depth is 1 m and the testing
period is 30 min. Water may not intrude in a quantity which
causes harmful effects while the housing is dipped in water
under standardized pressure and time conditions.
Ambient conditions
Lens mount
C-mount, see
Mounting holes bottom/top/side/front
3/0/0/0
Thread diameter
M5
Status LED
Interface connector
M12 connector, screwable
Power supply
PoE or 12-24 V external
I/O connector
, screwable
Electrical specifications
Special features
Integrated image memory
Internal pixel pre-processing
Can be supplied via Power-over-Ethernet
